Home > Anti-static Floor System

Anti-static Floor System

Anti-static Floor System

About of Anti-static Floor System

Anti-static is an objective natural phenomenon that occurs in a variety of ways, such as contact, friction, and peeling. Especially in the field of production, there are two hazards: First, static electricity can interfere with the normal working state of precision instruments, resulting in data misalignment; second, sparks can be generated after static electricity accumulation, and it is easy to cause disasters in flammable and explosive production workshops. Sexual accident. Therefore, anti-static floor treatment is required in the ground of electronic and electrical workshops, on the ground of precision instrument workshops and in places with high fire protection levels. Especially in the electronics industry, semiconductor, petroleum industry, weapon industry, textile industry, rubber industry, as well as electrostatic hazards in the field of aviation and military, and the ground as a necessary contact surface for instrumentation, equipment placement and personnel activities, the construction of anti-static floor is the most Critical and critical, seek to reduce the loss caused by static electricity.


KAIDA's anti-static floor materials are a good solution to production accidents caused by static electricity or floor sparks. For the special requirements of some industries, two anti-static floor solutions have been introduced: KAIDA metal anti-static floor and KAIDA epoxy anti-static floor.

KAIDA Metal Anti-static Floor Product Description

KAIDA metal composite anti-static floor material, adding non-metallic non-fired aggregates in moderation to save production costs. The patented superhard metal aggregate and non-ignition material are selected, and the special anti-static floor material is laid on the surface of the general concrete. The new technology is used to make the material and the concrete surface synchronously form a whole. The metal material (iron) itself has good electrical conductivity and has anti-static function. It can be used with metal materials (iron) to change its physical and chemical properties, and it is based on foaming and pore-forming. Adding rare earth metal to change the characteristics of single iron easy to oxidize and impact to produce sparks, forming rare earth iron alloy, that is, anti-static, non-flaming, anti-rust and anti-shock metal aggregate. After anti-rust treatment, it has the characteristics of anti-rust, anti-static and anti-shock. It does not have the function of friction and collision without generating sparks.

Advantages and Features:

1.The floor has anti-static, friction, collision and does not cause fire, generally impact resistance, high wear resistance, compression resistance, and bending resistance.

2.High surface density, good impermeability, anti-oil penetration, anti-corrosion, salt and alkali resistance, weak acid resistance

3.Frost resistance -80 ° C, heat resistance +200 ° C, no shrinkage and no cracking

4.Combustion performance rating is A1

5.Synchronous construction with concrete can greatly save the construction period

Application Range:

1.A place with relatively low wear resistance and low pressure resistance requirements

2.A place where anti-static and non-fire requirements are required

3.Flammable, explosive, explosion-proof ground

4.There will be oil spills, where oil and oil resistance are required.

5.Reconstruction works for old concrete floors

KAIDA Epoxy Anti-static Floor Product Description:

With the advancement of anti-static floor coating technology, the use of epoxy anti-static floor coating to paint concrete floor to obtain anti-static generation has been widely used. The epoxy anti-static floor has a smooth surface, beautiful appearance and overall. Seamless, easy to clean, easy to maintain, anti-static effect long-lasting and effective, low cost, etc., can be widely used in electronic and electrical equipment manufacturing, computer hardware precision equipment, electrical control, printing, textile, military and other places requiring anti-static or explosion-proof Ground coating. For the special requirements of precision electronics, precision instruments, precision instruments and other production sites, the use of epoxy anti-static floor construction can effectively reduce the repair rate and wear of precision electronic products, and reduce the carrying of low-voltage static electricity to precision electronics during the production process. Product hazards.

Performance Characteristics:

1.Made of solvent-free high-grade epoxy resin and high-quality curing agent;

2.The surface is smooth, beautiful, and has a mirror effect;

3.Corrosion resistant to acid, alkali, salt and oil media, especially resistant to strong alkali

4.Good performance;

5.Abrasion resistance, pressure resistance, impact resistance, and certain flexibility.

Material Properties:

1.Solvent-based reaction hardening type, beautiful surface gloss and good electrical conductivity.

2.Main raw materials: solvent-based epoxy resin and conductive materials

3.Wear resistance: 15mg (wear wheel CS-17, wheel weight 1,000gf{9.8N} revolutions 1,000 revolutions)

4.Adhesion strength: 230N/cm2 (Newton: International Unit)

5.Impact resistance: 1Kgw/1mh without cracks, no peeling, no deformation.

6.Hardness: 1H-2H

KAIDA Anti-static Floor Effect

Scope of Application:Highly clean, beautiful, dust-free, sterile electronic and microelectronics industries are required for anti-static requirements.

  •  KAIDA metal anti-static floor effect

    KAIDA metal anti-static floor effect

    KAIDA metal anti-static floor effect

  • KAIDA epoxy anti-static floor effect

    KAIDA epoxy anti-static floor effect

    KAIDA epoxy anti-static floor effect

Recent post
contact us
Contact Person
leave a message:
Contact Now
Address:
No. 3302, Building 9, Boxuan Garden, Dagu South Road, Hexi Dist., Tianjin, China (Mainland)